Precisa

Presisjonsvekt - LX 920M SCS, Avlesning: 2 mg

Modell med innebygd selvkalibrering (SCS). Telleprogram, %-veiing, dyreveing, tetthetsbestemmelse, doseringsprogram, statistikk, repeterbarhetstest. RS232 for printer/PC og USB.

Avansert brukergrensesnitt og display
Det avanserte brukergrensesnittet utnytter ny softTOUCH-teknologi for kontroll. Berøringsfelt, opplyst kun når en funksjon er aktiv, veileder brukeren og tillater rask og feilfri betjening. Det superklare blueLINE VFD-displayet tar enkel avlesning til et nytt nivå.
Enkel rengjøring og demontering

321-serien har easyCLEAN - den lette vekt- og draftskinndesignen for avtørking. Det unike konseptet med den nye draftskinnens 270° uhindrede visning tillater verktøyfri demontering og montering på sekunder, og kan enkelt rengjøres i oppvaskmaskinen.
Standardgrensesnitt og tilkoblingsmuligheter
Vekten leveres som standard med RS232- og USB-grensesnitt og kobler seg til det brede utvalget av Precisa-tilbehør og kommunikasjonstilkoblinger.

  • Die-cast aluminium housing of the balance
  • blueLINE high contrast blue vacuum fluorescent display
  • As standard with fully automatic internal calibration system, programmable on time or temperature controlled (SCS)
  • Clock with date and time
  • Printout according GLP
  • USB device and RS232/V24 bi-directional interface as standard
  • PrecisaBUS for the different accessories
  • Electronic anti-theft code
  • IP65 protection against ingress of dust and water available
  • Updates via Internet

Integrated functions with easy operation and maximum functionality:

  • Variety of measurement units
  • Piece-counting
  • Percent weighing
  • Live Animal weighing
  • Dynamic weighing
  • Density determination
  • Plus/minus check weighing
  • Formulation, Weight by totalisation
  • Free units calculation
  • Statistics calculation and recorder function

Specific Accessories

  • Draft shield 321 LG, height 260mm
  • Glass draft shield for balances with 1 mg readability including cover
  • Hook for below-balance weighing port
  • Density kit, for 0.01mg and 0.1mg balances, container size: Ø = 75mm, h = 100mm
  • Density kit solids only (without glass body and hook), for 0.01mg and 0.1mg balances, container size: Ø = 75mm, h = 100mm
  • Glass body for density determination of liquids, V = 10cm3
  • Downholder for samples with ρ < 1g/cm3
  • Animal weighing bowl complete, for 0.01g, 0.1g and 1g balances
  • Dust cover for the whole balance, set of 20 pieces
  • Cable for using the balance as reference balance
  • External USP battery pack for an uninterruptible power supply
  • Power supply adapter with Euro plug for IP65-protected balances (80 V – 240 V)
  • Pedal for tare or print function

General Accessories

  • Printer CBM910 230V, incl. data cable and paper roll
  • Printer CBM910 115V, incl. data cable and paper roll
  • Paper roll for Printer CMB910
  • Ribbon for printer CMB910
  • Multiplexor for up to 7 balances of the series 165/320/321/360/490 for serial (RS232) data transmission to PC or printer (at least one balance has to be of the series 320/321)
  • Adapter RJ45 / DB9 f, (to PC)
  • Adapter RJ45 / DB25 m, (to printer)
  • Data cable DB9 m / RJ45, crossed, length 1.5m (from reference to counting balance)
  • Data cable DB9 m / DB9 f, length 1.5m, (to PC)
  • Data cable DB9 m / DB25 m, length 1.5m, (to printer)
  • USB cable A-B, length 1.5m
  • HID cable, RS232 / USB (x: 0=e, 1= d, 2=f)
  • UPS (uninterruptible power supply), external
  • Anti-theft device, mechanical
  • Bowl for diamonds (carat bowl)

Options

  • Integrated, fully automated self-calibrating system SCS including clock. Automatic calibration for temperature changes and time programmable
  • IP65 protection: protects against dust and splash water, not available for every model
  • IP65 protection including cable for an RS232 interface with DB9 female 1.5 m (PC): protects against dust and splash water, factory fitted, not available for every model
  • Preparation for calibration in accordance with EC / OIML, no calibration! Only for balances with EC / OIML type approval
  • Manufacturer‘s factory calibration in accordance with EC / OIML Only for balances with EC / OIML type approval and SCS

PrecisaBUS Accessories

  • Remote display, freestanding, with cable, length 1.5m
  • Remote display, mounted to the wall, with cable, length 3m
  • RS232 interface box for data transmission, DB25 f:
    – to PC, printer or bar code printer
    – from bar code reader (350-8856) or reference balance
  • Interface box, current loop, 20mA, passive
  • Analog output box, -10V .. +10V, resolution 10mV
  • Ethernet box, wired
  • Ethernet box, wireless
  • Signal lamp, indicator with 3 lamps; red, green and yellow
  • Horn for signal lamp
  • I/O box with 6 TTL inputs and 8 relay outputs
  • CCE bar code scanner BCS5040, DB25 m, to be connected by meanings of the RS232 interface 350-8506

SmartBox Applications

  • SmartBox Counting
  • SmartBox FPVO (finished goods packing control)
  • CCE bar code scanner BCS5040, RJ45, to be connected by meanings of channel 1 or 2 of the SmartBox